Original Autel Diagnostic Tools

What should you do when your Autel MaxiIM IM508 runs out of space? 1. Clean up the music or picture. 2. Delete the app client does not use. 3. Reset the tablet. The specific operation of the above three methods can refer to the following article: (Solution) Autel IM508/IM608 stuck during update In this article, we will introduce to you in detail how to install extra storage for Autel IM508 . We recommend a maximum of 32 gigabytes for optimal performance, make sure it is a micro SDXC with UHS-1. After installing the SD card, you need to go to the "Data Manager", then "Vehicle Management". Now one by one select these brands and move them to the new storage you created with your SD card. After this is complete, return to the MaxiIM main screen then choose "Update". Done! You can also watch the video for the tutorial:

This post will guide you on how to program a remote for a 2013 Toyota Sienna by using Autel IM508 key programmer . Here comes the steps: Select "IMMO" >> "Toyota" >> "Manual selection" >> "USA" >> "Sienna" >> "2011-2014" >> "Blade Key" Click "Yes" to continue Then go to choose "Control unit" >> "Remote System (CAN)" >> "Remote Control Learning" Turn on the ignition and make sure that the driver door is open, then click"OK" to continue. Configuring the system... Establishing vehicle communication... Press LOCK and UNLOCK simultaneously for 1s and then press "LOCK" or "UNLOCK" for 1s within 3s. Learning succeeded. For more technical services, please follow http://blog.obd2shop.co.uk/

Customer feedback: While updating the IM608 tablet , I found it always stuck on this interface, what should I do? Solution: Check if the device space is full (setting>storage). If the memory is full, try the following: 1. Clean up the music or picture. 2. Delete the app client does not use. Refer to this video: https://www.youtube.com/watch?v=W2OXOW8T4R4 3. Reset the tablet. Refer to this video: https://www.youtube.com/watch?v=SjkQB0otK58 4. Inserted one new SD card Refer to this video: https://www.youtube.com/watch?v=_ufpKMi1OHw For more technical services, please follow https://www.obd2shop.co.uk/

 This article is about Autel MaxiSYS MS908S PRO II report saving and cloud share function display. Here comes the steps: Click "Diagnostics", select the SAVE logo in the upper right corner of the screen, and click "Report to Cloud". Fill in the corresponding information and click "Save". Report saved successfully! Go back to the previous interface, and click "Data Manager" >> "Cloud Report". Click the share icon to share the report. As the picture shows, there are three ways to share, here we choose "Send Email". Email sent successfully! Video Guides:

Today I'm gonna program 2015 Iveco Daily all keys lost with Autel MaxiIM IM608 II Key Programmer . I couldn't connect the BCM via OBD even though I've found its security card. So I should remove BCM to read EEPROM. Tools Required LISHI SIP22 2-in-1 Auto Pick Xhorse Dolphin XP005 Autel IM608 II + XP400 Pro APB129 EEPROM Adapter Iveco BCM Step1. Cut Key Use LISH Auto Pick to decode the door lock, then cut the key with Dolphin XP005 key cutting machine. All key lost >> Iveco >> Enter key code: DE08545 >> OK >> Cut key Step2. Program Key Remove BCM from the vehicle. The EEPROM SSOP is 95640. Install the APB129 adapter onto XP400Pro, and place a new key. Programmer >> Accept >> Write key via dump >> OK >> Europe >> Iveco >> Daily >> 2012- (95640) >> One-touch processing Check: 1. If the programmer is connected correctly. 2. If the chip is connected correctly. 3. If the key is placed correctly. 4. If the sele...

When using Autel IM508 / IM608 , you may encounter the problem shown in the figure below. At this point, you need to update the VCI firmware version. This post will guide you on how to do it. IM508 built-in VCI Firmware Upgrade Connect the tablet and the vehicle with the supplied main cable, and ensure the tablet is connected to the Internet. The built-in VCI module will be automatically upgraded if a firmware update is available. IM608 VCI Firmware Update Click VCI Manager at the bottom of the tablet interface, this application pairs the tablet with the MaxiFlash, checks the communication status, and updates the VCI software. When connected to the Internet, this function checks for an available update. When there is a new software version available, tap the displayed Update button to update. Otherwise, the tablet will display "Your software is up to date". For more technical support, please follow: http://blog.obd2shop.co.uk/

This post will guide you on how to use the print function of the Autel MaxiTPMS TS608 tool . Here are the steps: Step 1. Activate all TPMS sensors to get IDs before performing any TPMS relearn. Step 2. Use the "Diagnostics" function to get the IDs and DTCs of the registered TPMS sensors from the ECU. Note: Before performing any relearn operation, data from step 1 and step 2 will be recorded as an "initial customer record". Step 3. Perform OBD relearn to write sensor IDs to ECU, the data of "Final customer record" will be updated after OBD relearn is completed. Step 4. Save the test report via the Save button or print the test report via the Print button. The test report will be displayed. Done! www.obd2shop.co.uk