Original Autel Diagnostic Tools

Recently, Autel has released a new IMMO function for the Volkswagen 5C/5D key adding. This article provides a complete step-by-step guide on how to use this feature, including vehicle information reading, IMMO data extraction, dealer key generation, and key learning. Step 1: Read Vehicle Information Navigate to the following path: Select [Volkswagen] >> [Expert selection] >>  [Key reading via dump] >> [Key reading via dump for 5C] >>  [Read vehicle information] Connect the device to the vehicle via OBD and execute the function. The system will read vehicle information, including: Current Key ID Key ID1 (hex) Key ID2 (hex) VIN Other relevant data Important: Follow all on-screen instructions carefully during the process. Step 2: Read IMMO Data 2.1 Available Methods There are two methods to perform this function: Programmer ( APB113 ) Programmer (Direct Connection) 2.2 Using Programmer (APB113) ① Select [Programmer (APB113)] ② Follow the on-screen operati...

Good news! Autel will release a major new IMMO feature on March 19: VAG 5C / 5D Key Adding. This function will be free of charge, provided the tablet software subscription remains valid. This article will provide a detailed overview of this new feature. New Function: VAG 5C / 5D Key Adding Supports Volkswagen, Audi, Skoda, and Seat models Supports reading original keys (via disassembly) to obtain immobilizer data Enables the generation of dealer keys and key learning functions Compatibility Tablets: IM508S , IM608II, IM608, IM508, IM608 PRO , and other IMMO devices Keys: Autel IKEY (5C type) and original OEM keys Accessories: XP401 / XP401 Pro / XP400 / XP400 Pro / XP1 Pro programmers, APB113 adapter (optional) Notes 5C: Supports both OEM keys and AUTEL IKEY (Model: IKEYVW003AL) 5D: Supports OEM keys only For more details, please contact: www.obd2shop.co.uk

Today, I'm going to add 2014-2020 Suzuki Vitara smart keys with AUTEL MaxiIM IM608 PRO II by OBD. After generating a VITARA(2016+) KeylessGo ID47 433M remote with VVDI Key Tool Max PRO , we go to program the keys. IMMO >> Accept >> Suzuki >> System selection >> Manual selection >> Keyless start(8-digit) >> Remote control learning Please switch Hazard ON. Please switch ignition ON(when doing all keys lost, if cannot switch ignition ON, you can try the immobilizer box wire short-circuit.) Press "Key learning". After the function is carried out, all keys will be cleared. These keys cannot be used unless they are learned again. If this function is required, please get all the keys ready. Please select to get the 8-digit PIN code: [Yes]: Calculate 8-digit pin code through networking. [No]: Enter 8-digit PNI code manually. Follow the IM608 Pro2 guidance step according to the key type: Mechanical Key: Switch on ignition with keys that need t...

Now I'm working on a 2014 Toyota RAV4 with all keys lost. Next, I'm gonna use the Autel MaxiIM IM608 PRO II to program a new blade key for this car. IMMO >> Auto VIN >> Toyota >> OK >> OK >> Control unit >> Immobilizer(H 8A/8E) >> Immobilizer reset(all keys lost) This function is only supported for the Middle East and the USA now. Ensure that the door remains open during the learning process. Enter the number of keys to be registered: 1 Turn the ignition off. Turn the ignition on. Turn the ignition off and remove the key. Turn the ignition on. Turn the ignition off and remove the key. Follow the following steps to learn 1 master key within 120s: 1)Insert the master key, turn the ignition on, and wait for 5s. Then quickly turn the ignition on and back off 5 times until the SECURITY lamp goes out, which indicates that learning is completed. Test the new key, it can start the engine normally. Done. This is using Autel IM608 Pro2 to progr...

Today I'm working on a 2020 Toyota Camry with all smart keys lost. It's a push-to-start vehicle. Next, I'm gonna use the Autel MaxiIM IM608 PRO II to program an Xhorse XM38 Smart Key for this car. Step1. Backup IMMO Data IMMO >> Accept >> Toyota >> Manual selection >> USA >> CAMRY >> 2012-2020 >> Smart key >> OK >> Control unit >> Keyless system >> Keyless system(CAN) >> Back up IMMO data >> Back up IMMO data(OBD) Ensure that the network connection of the device is good. Turn the ignition off, and turn the hazard warning lamps on and off once. This function is used to back up the EEPROM data of the smart box of the vehicle. The data can be used to generate the simulator key for the emergency start of the vehicle to perform the key-matching function. Warning: You must turn off the Bluetooth function of the device and connect VCI to Autel IM608 Pro2 with a USB cable. Otherwise, the function may fa...