Original Autel Diagnostic Tools

Hey, buddies, look at what I have: A Godiag GT100 OBD2 break out box, an Autel MaxiDiag MD808 Pro code reader, a CAS4 ECU box, a test platform made by obd2shop.co.uk engineer. Guess what I will do? I use them to read CAS4 ECU info.  Here we go:  Give 12V power supply to Godiag GT100, then press "Power" button;  Connect Godiag GT100 to Autel MaxiDiag MD808 Pro use the 16pin cable;  Connect the two adapters of test platform to CAS4 ECU box and another end to Godiag GT100;  On Godiag GT100, press "12V (30)" button and the test platform indicator will flash.  The method to read CAS4 ECU information: the Autel MaxiDiag MD808 Pro, select "scan" then press "Ok" -> European -> BMW -> OK (to turn off ignition, wait approx 10 seconds switch on ignition again) -> 4 series -> F32/F33 ->Control Units -> Drive -> CAS Car access system -> ECU information.  Turn on the switch of the test platform and then have ECU information on the ...

Car model and year: 2007 Mercedes ML350 Symptom: AC just stopped working, but the fan went on high. What I tried to do: Went to have it checked and was told that there was an obstruction on the system and Compressor no good. So I replaced the Compressor, Dryer, Expansion Valve, AC Pressure Sensor, Ambient Sensor, and replaced all seals. Did a 2-hour vacuum, let sit for 1 hour to see if had any leaks. But when I’m trying to charge the system, after the 2nd 12 oz can, it doesn’t want to accept any more refrigerant as it seems that the Compressor is not activating. Checked the voltage and there are only 4.2 volts. I replaced the Climate Control Switch w/another used one to check, but still all the same. What should do next? When there is a problem in the A/C system, the A/C Control Module will prevent the compressor to operate. The code/s must be read to see what the problem is. After replacing the component, according to the code #, the code must be erased and then the A/C compressor w...

Autel MD808 Pro compare with MD808 basic and MD802 in the aspects of hardware and functions.  In hardware: Autel MD808 Pro is based on the ARM Thumb Processor (400 MHz), it needs only 6s booting time to allow you to build a more fluid user experience. Autel MD808 pro: a revelation in diagnostic and service tool is launched with the brand–new exterior in terms of design, structure, and buttons; MD808 PRO Included with 16G Micro SD Card, full color 800*480 display to take your diagnostic experience to a whole new level.  In vehicle coverage: MD808 PRO is an upgrade version of Autel MD808 and Autel MD802 , coverage more car and more systems. MD808 PRO support all system of the car, md808 only support 4 system.  In functions: Only Autel MD808 PRO support Steering Angel Learning, DPF functions, and Battery Registration and reset. Autel MD808 PRO offers more advanced features and functions to troubleshoot basic four systems (Engine, Transmission, SRS and ABS) for m...