Today, I'm going to add 2014-2020 Suzuki Vitara smart keys with AUTEL MaxiIM IM608 PRO II by OBD. After generating a VITARA(2016+) KeylessGo ID47 433M remote with VVDI Key Tool Max PRO, we go to program the keys.
IMMO >> Accept >> Suzuki >> System selection >> Manual selection >> Keyless start(8-digit) >> Remote control learning
Please switch Hazard ON.
Please switch ignition ON(when doing all keys lost, if cannot switch ignition ON, you can try the immobilizer box wire short-circuit.)
Press "Key learning".
After the function is carried out, all keys will be cleared. These keys cannot be used unless they are learned again. If this function is required, please get all the keys ready.
Please select to get the 8-digit PIN code:
[Yes]: Calculate 8-digit pin code through networking.
[No]: Enter 8-digit PNI code manually.
Follow the IM608 Pro2 guidance step according to the key type:
Mechanical Key: Switch on ignition with keys that need to match;
Smart Key: Place the smart key, which needs to match on the push start button(key logo face push start button);
Knob Type Smart Key: Slot the mechanical key on the ignition cylinder and place the smart card on the knob switch.
Number of current keys: 1
Learning complete.
Do you want to continue learning about the next key? Yes.
Just repeat the same operation as the previous.
Number of current keys: 2
Press No to complete.
Test the new keys. All can normally work.
Done.
Comments
Post a Comment