Original Autel Diagnostic Tools

Today I'm gonna program 2015 Iveco Daily all keys lost with Autel MaxiIM IM608 II Key Programmer . I couldn't connect the BCM via OBD even though I've found its security card. So I should remove BCM to read EEPROM. Tools Required LISHI SIP22 2-in-1 Auto Pick Xhorse Dolphin XP005 Autel IM608 II + XP400 Pro APB129 EEPROM Adapter Iveco BCM Step1. Cut Key Use LISH Auto Pick to decode the door lock, then cut the key with Dolphin XP005 key cutting machine. All key lost >> Iveco >> Enter key code: DE08545 >> OK >> Cut key Step2. Program Key Remove BCM from the vehicle. The EEPROM SSOP is 95640. Install the APB129 adapter onto XP400Pro, and place a new key. Programmer >> Accept >> Write key via dump >> OK >> Europe >> Iveco >> Daily >> 2012- (95640) >> One-touch processing Check: 1. If the programmer is connected correctly. 2. If the chip is connected correctly. 3. If the key is placed correctly. 4. If the sele

When using Autel IM508 / IM608 , you may encounter the problem shown in the figure below. At this point, you need to update the VCI firmware version. This post will guide you on how to do it. IM508 built-in VCI Firmware Upgrade Connect the tablet and the vehicle with the supplied main cable, and ensure the tablet is connected to the Internet. The built-in VCI module will be automatically upgraded if a firmware update is available. IM608 VCI Firmware Update Click VCI Manager at the bottom of the tablet interface, this application pairs the tablet with the MaxiFlash, checks the communication status, and updates the VCI software. When connected to the Internet, this function checks for an available update. When there is a new software version available, tap the displayed Update button to update. Otherwise, the tablet will display "Your software is up to date". For more technical support, please follow: http://blog.obd2shop.co.uk/