Original Autel Diagnostic Tools

Autel MaxiIM IM608 + XP400 Pro key programmer supports to add key for Volkswagen Golf MK7 2018, it can also perform all key lost, read password, remote learning for VW vehicles as below: VW(EU) Car List: Vehicle Model Year System Add Key All Key Lost Read Password Remote Learning Golf 1998-2007 IMMO3 INS Part support by OBD Part support by OBD Part support by OBD All support by OBD Golf 2004-2009 IMMO4 CAN INS Part support by OBD × Part support by OBD All support by OBD Golf 2009-2013 IMMO4 CAN INS All support by OBD All support by OBD All support by OBD All support by OBD Golf 2013- MQB INS All support by OBD All support by OBD All s...

There was an engine oil warning on the dashboard of a BMW E60 2009. Today I’m going to use the Autel MaxiCOM MK808 diagnostic tool to reset oil. Plug Autel MK808 connector into OBD2 port, press Diagnostics >> BMW >> Automatic selection >> Read >> OK >>Yes Hot functions >> Condition based service reset KWP >> Yes Date and time were set successfully in the vehicle. Condition-based service(CBS) contents are being read. Please wait... Select “Engine oil” option, press “Reset” Performing condition eased service(CBS) reset... As you can see, the engine oil availability changed from 0% to 100% And the engine oil warning has gone! The oil reset was done! This is using Autel MK808 Scan Tool to perform oil reset on a BMW E60 2009. It also has other special reset functions such as BMS reset, IMMO service, ABS bleeding, steering angle sensor, electronic parking brake service...etc. http://blog.obd2shop.co.uk/how-to-reset-oil-for-a-bmw-e60-2009-via-autel-...

I got a Volkswagen Jetta 2017 MQB all keys lost, here we go to use Autel MaxiIM IM608 + XP400 to program a key by OBD. Connect Autel IM608 with OBD, let’s start: IMMO >> Accept >> Volkswagen >> Advanced mode >> IMMO 4 + MOQ key >> All keys lost >> Yes  Read IMMO Data Please turn on the hazard warning flasher,  if a vehicle with Kessy: push down START/STOP button; If the vehicle has no Kessy: insert the blank key and then turn the ignition. Press “OK”. The calculation is completed!  Press “OK” to continue. Make Dealer Key Do you need to make a dealer key? Yes Put a blank key in the XP400 programmer keyhole, press “OK”. Do you need to lock the key? The key cannot be unlocked after it is locked. Unlocked keys may not be able to learn the vehicle. Press “Yes”. Make dealer key success! Press “No” to go on the next step. Key Adaption To Vehicle Does the vehicle have Kessy? Yes Input the number of keys to be learned, press “OK”. Place the key...