Original Autel Diagnostic Tools

What is going on, guys? Now I’m gonna program a new ignition key fob for the 2014 Chevrolet Silverado with Autel MaxiIM IM608 key programmer . As you can see, this is the new key to be programmed. Connect AutelIM608 scan tool to OBD2 port of the car, turn on the ignition, then let’s get to start: Press “IMMO”>>“VIN” on the upside bar >> Auto detect >> Accept >> OK (if VIN number was blank, press “Read” to acquire) >> Yes 5.3L(L83) >> Transfer case, two speed, switch activated (NQH) >> Hot functions Auto control dual zone (CJ2) >> Base >> Immo & Keys Add/replace key fobs >> Key fob 1 >> Read the notes carefully, press “Continue” Press “Learn” to start, hold and press the LOCK & UNLOCK buttons together on the key until we hear the beep.  Status “Uncommanded” changed to “learn” on the Autel IM608 scanner . That means the key has been learned successfully. Let me check if the key was programmed... The lock & ...

Hey, buddies, look at what I have: A Godiag GT100 OBD2 break out box, an Autel MaxiDiag MD808 Pro code reader, a CAS4 ECU box, a test platform made by obd2shop.co.uk engineer. Guess what I will do? I use them to read CAS4 ECU info.  Here we go:  Give 12V power supply to Godiag GT100, then press "Power" button;  Connect Godiag GT100 to Autel MaxiDiag MD808 Pro use the 16pin cable;  Connect the two adapters of test platform to CAS4 ECU box and another end to Godiag GT100;  On Godiag GT100, press "12V (30)" button and the test platform indicator will flash.  The method to read CAS4 ECU information: the Autel MaxiDiag MD808 Pro, select "scan" then press "Ok" -> European -> BMW -> OK (to turn off ignition, wait approx 10 seconds switch on ignition again) -> 4 series -> F32/F33 ->Control Units -> Drive -> CAS Car access system -> ECU information.  Turn on the switch of the test platform and then have ECU information on the ...