Original Autel Diagnostic Tools

2019 Chevy Cruze took Canadian cluster out to change faceplate, put back in all needles aligned to ZERO. When I turn the vehicle on everything is perfect all gauges cycle. When i drive the vehicle analog and the digital in the center message screen are OFF. Does anyone have any idea if it needs calibration and if Autel IM608 can calibrate? How to do next? let's read the professional's advice: You can't just swap faceplate. the software needs to be changed as well. You"ll need to replace that cluster and of course you'll have to program it using GM SPS. Don't even think about getting a used one. WILL NOT WORK After reading the above advice, I have a question: cluster dont need to be replaced because i know a speedo place that will program it but off course they dont tell me what they’re using to do the job. Answer: Well. As long you know how to edit hex file than you do not need to replace it. Hold on... Did u really take the KM faceplate off and put on a MPH f...

Some customers have trouble connecting the Autel MaxiIM IM608 device to Autel update server.  Show error as follows: Possible reason:  The network environment disallows access to Autel server, the DNS domain IP address is not allowing it to access autel server.  Please follow the below solution to solve the problem:  Go to system settings: Then do as follows:  After that, you will see the device will connect to the Autel update server normally and you can download the update normally now.  Autel MaxiIM IM68 tech support:  https://www.obd2shop.co.uk/wholesale/autel-maxiim-im608.html